101 catalog 1307819 dimensions are in inches and dimensions ar e shown for usa: 1-800-522-6752 south america: 55-11-2103- 6000 revised 8-08 millimeters unless otherwise reference purp oses only. canada: 1-905-470-4425 hong kong: 852-2735-162 8 specified. values in brackets specifications subject mex ico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to chang e. c. america: 52-55-1106-0803 uk: 44-8706-080-208 breakaway and retention headersunshrouded ampmodu interconnection system breakaway and retention headersunshrouded 5 product facts n design and inventory versatilityheaders can be broken into any size needed n variety of popular sizes available n substantial time/labor savings can install all posts at one time n vertical and right-angle versions available in single- and double-row configurations n phosphor bronze posts n choice of gold duplex or tin plated posts n post lengths include .230 [5.84] and .318 [8.08] for connector mating n board retention feature available n black, glass-filled thermoplastic housings; high temperature compatible n recognized under the component program of underwriters laboratories inc., file no. e28476 n certified by canadian standards association, file no. lr 7189 performance characteristics electrical insulation resistance 5,000 megohms minimum initial dielectric withstanding voltage 750 v rms at sea level environmental operating temperature -65c to +105c (black thermoplastic housings) current 3 amperes maximum per contact (dependent upon mating receptacle) r r
102 catalog 1307819 dimensions are in inches and dimensions ar e shown for usa: 1-800-522-6752 south america: 55-11-2103- 6000 revised 8-08 millimeters unless otherwise reference purp oses only. canada: 1-905-470-4425 hong kong: 852-2735-162 8 specified. values in brackets specifications subject mex ico: 01-800-733-8926 japan: 81-44-844-8013 www.tycoelectronics.com are metric equivalents. to chang e. c. america: 52-55-1106-0803 uk: 44-8706-080-208 breakaway headersunshrouded, single-row, .100 [2.54] ce nterline ampmodu interconnection system note: all part numbers are rohs compliant. breakaway and retention headers-unshrouded 5 *.003 [0.08] tolerances not to accumulate within one connector pattern. headers with solder tails material and finish housing black thermoplastic, 94v-0 rated, high temperature compatible posts phosphor bronze, plated as follows: plating a duplex plated .000030 [0.00076] gold on contact area, .000100- .000200 [0.00254-0.00508] tin on solder tail, with entire post underplated .000050 [0.00127] nickel plating b duplex plated .000015 [0.00038] gold on contact area, .000100- .000200 [0.00254-0.00508] tin on solder tail, with entire post underplated .000050 [0.00127] nickel plating c .000100-.000200 [0.00254-0.00508] tin over .000050 [0.00127] nickel performance characteristics (board retention tails) insertion force 12 lb [53.4n] max. retention force .25 lb [1.11n] min. related product data mateable connectors refer to the mating post selection guide page 90 technical documents page 276 see mating connector for applicable product and application specifications. .025 [0.64] square straight posts a b e ref. (contact area) b .025 [0.64] typ. .045 [1.14] typ. .090.002 [2.290.05] d c .090 [2.29] c = .090 [2.29] c = .120 [3.05] c = .125 [3.18] header no. of dimensions d = .230 [5.84] d = .230 [5.84] d = .318 [8.08] style pos. a b e = .185 [4.70] e = .185 [4.70] e = .200 [5.08] post plating/part nos. post plating/part nos. post pl ating/part nos. plating a plating b plating c plating a plating b platin g c plating a plating b plating c with 5-146285-1 5-146284-1 5-146282-1 5-146281-1 5-146280-1 5-146278-1 5-146277-1 5-146276-1 5-146274-1 solder tails 1 .084 [2.13] (see notes 40 9-146285-0 9-146284-0 9-146282-0 9-146281-0 9-146280-0 9 -146278-0 9-146277-0 9-146276-0 9-146274-0 1 and 2.) 3.984 [101.19] 3.900 [99.06] with board 5-146297-3 5-146296-3 5-146294-3 5-146293-3 5-146292-3 5 -146290-3 5-146289-3 5-146288-3 5-146286-3 retention tails 3 .284 [7.21] .200 [5.08] (see notes 40 9-146297-0 9-146296-0 9-146294-0 9-146293-0 9-146292-0 9 -146290-0 9-146289-0 9-146288-0 9-146286-0 2 and 3.) 3.984 [101.19] 3.900 [99.06] notes: 1. headers without retention tails may be broken to the desired number of positions using tool kit no. 314818-1 (not shown) . 2. headers are also available in sizes 2 thru 39 pos itions (with solder tails) and 4 thru 39 positions (with board retention tails). when ordering, add t he prefix and/or suffix (dash) numbers plus 5- -0 to the base part number that cor responds with the desired size. for example, the c omplete part number for an 8-position header with s older tails (c dimension .090 [2.29], post plating a) would be 5-146285-8. t he complete part number for a 26-position header wi th board retention tails (c dimension .120 [3.05], post plating b) would be 7-146292-6. this part numbering system applies o nly to this page. 3. for c dimensions .120 [3.05] and .125 [3.18], bo ard retention using kinked tails are for headers 6 positions and smaller; headers 7 positions and large r use swaged tails. headers with a c dimension of .090 [2.29] have swag ed tails for all sizes. .030.002 [0.760.05] .035.003 [0.890.08] dia. typ. (plated) recommended hole size before plating .045.001 [1.140.02] dia. typ. recommended pc board mounting pattern (for .062 [1.57] thick pc board; .008 [.203] thick stencil) *.003 [0.08] tolerances not to accumulate within one connector pattern. a b e ref. (contact area) b .025 [0.64] typ. .045 [1.14] typ. .150.002 [3.810.05] d c (see note 3) .090 [2.29] .030.002 [0.760.05] .040.003 [1.020.08] dia. typ. (plated) recommended hole size before plating .045.001 [1.140.02] dia. typ. recommended pc board mounting pattern (for .062 [1.57] thick pc board; .008 [.203] thick stencil) headers with board retention tails .100* [2.54] .100* [2.54]
|
